Skip to content
PEC

Professional Engineer (PE) vs Registered Engineer (RE) for firm owners

Which PEC constructor and operator categories need a Professional Engineer, how many, with how many years of experience, and where a Registered Engineer is enough.

PEC2 min read

01Which categories need a P.E., and how many?

Table A of the Construction and Operation of Engineering Works Bye-Laws, 1987, as set out in PEC’s Registration Policy 2017 guidelines (amended upto June 28, 2024), sets the engineer requirement for each constructor category. Read each row whole, since the requirement is the full row and not just the P.E. count:

  • C-A: two P.E.s, each with a minimum of 20 years of work experience, plus R.E.s
  • C-B: two P.E.s, each with a minimum of 15 years, plus R.E.s
  • C-1: two P.E.s, each with a minimum of 10 years, plus R.E.s
  • C-2: one P.E. plus R.E.s. Table A gives no year figure for this P.E.
  • C-3 and C-4: 50% R.E.s. Table A names no P.E.
  • C-5 and C-6: one R.E. Table A names no P.E.

02How many years of experience does a P.E. need?

The table counts years only for the P.E.s. It sets 20, 15 and 10 years for the two P.E.s at C-A, C-B and C-1. The single P.E. at C-2 has no year figure in the table. The policy text we hold does not say how PEC decides that an engineer is a P.E. or an R.E., or how the years are counted, so ask PEC before you rely on an engineer’s title in a file. The table words the figure as a minimum, so a P.E. with fewer years does not meet that row, whatever the title says.

03What if you own the firm as an engineer?

Paragraph 4 of the guidelines covers engineer-owned firms. The owner must be an engineer (PE or RE) holding at least 51% of the shares, with the experience below. The route covers C-5 to C-3, plus C-2 (but not O-2):

  • C-5: experience not required, minimum 51% shares
  • C-4: each engineer owner with more than five years of experience
  • C-3: each engineer owner with more than 10 years of experience
  • C-2 (not O-2): an engineer owner or partner with 20 years of experience, holding at least 51%

The engineer must be the chairman, CEO, managing director or managing partner (paragraph 4(e)). SECP evidence is needed for new registration only at C-3 and C-2 (paragraph 4(f)). Above C-3 and C-2, an engineer-owned firm is treated like a non-engineer owned firm. The credit-point condition is relaxed for engineer-owned firms only up to C-3 and O-3. Ownership cannot be transferred freely either: it passes to the owner’s legal heirs or to another engineer of the same category, according to experience (paragraph 4(h)).

These rules come from the guidelines as amended upto June 28, 2024. The operator rows in Table B follow the same pattern, so an operator firm reads its own row the same way.Check the current constructor schedule on pec.org.pk before you file, and confirm which category your engineers actually support.

Have a file like this? Send it to the desk.Ask the desk
PEC

Quick answers

The questions every new client asks.

  • No. Table A requires one registered engineer for C-5 and C-6. A P.E. is first required at C-2, where one is needed alongside registered engineers.